Maintenance :
The pump can be used to grout cement slurry, chemical pulp or other low-viscosity well-liquidity materials.
1. Before using the manual grouting pump, add proper amount of grease to the movable hinge of the rocker, and shake the handle at a constant speed to ensure flexible use and prevent corrosion.
2. When the fasteners are found to be loose during use, they should be properly tightened in time. Use moderate force when shaking the handle to prevent damage to parts.The joints of the inlet and outlet pipes are tightly connected with the pump body after being fastened with steel wire clips.
3. If poor suction performance is found, the following measures should be taken:
(1) Check the tightness of the tightness of the joints at the feed end.
(2) Check whether the feed pipe is damaged or leaking.
(3) Check whether there is material in the barrel.
(4) Check whether the discharge port is loose or blocked by debris.
4. If a poor discharge is found, take the following measures:
① Check whether the discharge pipe is blocked;
② Whether the discharge valve is open.
5. When filling the grout, the discharge pipe must be placed unobstructed, otherwise it will directly affect the construction operation.
6. Note that the slurry should not contain sand, so as not to affect the service life of the machine.
7. For outdoor use in winter, the following items should be paid attention to when the temperature is below zero:
(1) The use time should not be too long;
(2) The prepared grout should be filled.
Features:
1. No electricity, small size, light weight, easy movement.
2. Simple structure, wearable parts, easy clean and maintenance, stable and reliable.
3. Manual operation, high pressure, adjustable grouting speed and flow, simple design and structure, which is easy to use, clean and maintain.
Specification:
| model | SDB manual grout pump |
| capacity | 0-8 L/min |
| max. pressure | 1MPa |
| cylinder dia. | 110mm |
| piston stroke | 42mm |
| inlet Dia. | 25/32 mm |
| outliet Dia. | 16/19mm |
| weight | 40kg |
| dimension(LxWxH) | 980x290x590mm(customer require) |
Henan Coal Science Research Institute Keming Mechanical and Electrical Equipment Co. , Ltd. (the former Keming Mechanical and Electrical department of Henan Coal Scientific Research Institute) is a subsidiary of Henan Coal Scientific Research Institute Co., Ltd. It is the first company in China to develop and produce shotcrete machines. It is one of the national standards for the development of spraying industry.
Achievements: It has more than 50 national invention patents and utility model patents, and more than 10 identification of relevant departments. It has won 8 awards from coal associations and provincial departments, and won the Henan Provincial Science and Technology Progress Award.In 2014, “Keming” brand won the famous trademark of Henan Province. It has been awarded ISO9001 Quality Management System Certification, OHSAS 18001 Occupational Health and Safety Management System Certification, ISO14001 Environmental Management System Certification and CE Certification.
Service: mechanical and electrical products, chemical technology, the development and manufacture of mining products, technical research of energy conservation and environment protection technology, and relative consultation service.
Related mmachines:
Our products are mainly applied in water conservancy and hydropower engineering, subway engineering, air-raid shelter construction, municipal construction, environmental greening projects, tunnel and bridge maintenance, slope maintenance, blast-furnace refractories spraying operations, mining concrete spraying operations, etc.
Grout pump:
Exhibition:
Bauma Shanghai 2018
FAQ:
1. Q:How to pay for this order?
A:Generally, TT, 30% deposit 70% before shipment； L/C at sight (high bank charge, not suggest, but acceptable);100% TT in advance (especially for small amount and spare parts etc.)
2. Q:How to place an order?
A:Both online order and offline order are acceptable.
3. Q:How about the package?
A:We have fumigation-free wooden case to protect the machine from damage during the long-distance delivery.
4. Q:What is the lead time?
A:1 week for sample model, 2~3 weeks for customized model. It depends for mass production.
5. Q:What should we do if there are some problems with the machine?
A:You can refer to the Operate Instruction or call our 24-hour service hotline. Also, our engineers are available to service overseas.
6. Q:Do i need technical skills to operate this machine?
A:Yes. Please read the Operation Instruction for some basic technical skills. And, we provide online and onsite technical training if necessary.
Product Tags:
|
|
Hopper Slurry Cement Grouting Pump 1 MPa Manual Grout Pump With Grout Tube Images
|
